FCS Simple Patch Repair Patch Regular - Epoxy
Pickup currently unavailable at BSS
Board Repair Made Simple
The FCS Simple Patch is a resin-infused 3oz fiberglass repair patch engineered specifically for epoxy surfboards. When a ding lets water into the foam, waterproofing the board fast is the priority. This patch does that with no mixing, no tools, and no downtime waiting for overnight cures. Peel, press, and expose it to sunlight and the repair is waterproof again in about 10 minutes.
Made in Australia, the FCS Simple Patch is developed in collaboration with the world's leading surf athletes and surfboard shapers. It is the same trusted brand that supplies fins to the world's top surfers and shapers, applied here to one of the most common problems in surfing: the mid-session ding.
How the FCS Simple Patch Works
The patch is pre-loaded with resin, so there is nothing to measure or mix. Peel the backing, place the patch firmly over the clean, dry ding, press out any air bubbles, and leave it in direct sunlight. The UV-activated resin cures in approximately 10 minutes under sun exposure. Once cured, the patch creates a waterproof bond that keeps water out of the epoxy blank.
This version is formulated for epoxy boards. Using the correct resin chemistry for your board construction is important: epoxy resin is compatible with EPS foam, while polyester resin can dissolve it. The FCS Simple Patch Epoxy removes the guesswork.
Key Features
- Resin-infused 3oz fiberglass construction for a strong, flexible bond
- Tool-free application: peel, place, press, cure
- Sun-cures in approximately 10 minutes under direct UV light
- Formulated for epoxy board construction
- Restores waterproof integrity to the damaged area
- Patch dimensions: 65 x 100 mm (large coverage area)
- Net weight: 2g / 0.07oz per patch
- Made in Australia
- Authentic FCS product
When to Use This Patch
Any ding that breaks through the glass and exposes foam needs to be sealed before the board goes back in the water. Water absorption weakens the blank, adds weight, and can cause delamination over time. The FCS Simple Patch is ideal for pressure dings, rail chips, and minor cracks on epoxy boards where a fast, reliable waterproof seal is the goal. For deeper structural damage, a professional repair is recommended.
Application Instructions
- Make sure the damaged area is clean and completely dry.
- Remove the patch from its packaging.
- Peel the backing and center the patch over the ding.
- Press firmly from the center outward to eliminate air bubbles.
- Leave the board in direct sunlight for approximately 10 minutes.
- Once cured, the patch is waterproof and the board is ready to use.
FCS supports ocean conservation through the Gowings Whale Trust, contributing 1% of sales to whale and marine wildlife protection.
Free Shipping, No Minimum for IWS Beach Club Members.
Returns are eligible within 30 days of receiving your order. Return shipping labels are FREE for IWS Beach Club Members. See more
Specifications
- Brand
- FCS
- MPN
- FSPR-PRG-EPS
- UPC
- 9340935086856
- Compatibility
- Epoxy boards (EPS foam construction)
- Patch Material
- Resin-infused 3oz fiberglass
- Patch Dimensions
- 65 x 100 mm
- Net Weight
- 2g / 0.07oz
- Cure Method
- UV / sunlight
- Cure Time
- Approximately 10 minutes in direct sunlight
- Tools Required
- None
- Quantity
- 1 resin-infused fiberglass patch per pack
- Country of Origin
- Australia
Frequently Asked Questions
- What is the FCS Simple Patch and how does it work?
- The FCS Simple Patch is a pre-loaded, resin-infused fiberglass patch that seals dings on surfboards without any mixing or tools. You peel, place, press, and expose it to sunlight. UV light activates the resin, which cures in approximately 10 minutes to create a waterproof bond.
- Is the FCS Simple Patch Epoxy version compatible with all surfboards?
- No. This version is specifically formulated for epoxy boards (EPS foam construction). Using it on a polyester or PU board is possible but FCS offers a separate polyester version matched to that construction. Using the correct chemistry for your board type gives the best adhesion and avoids compatibility issues.
- Do I need any tools or additional resin to use this patch?
- No tools or additional resin are required. The patch comes pre-loaded with resin. Just peel, press, and let the sun cure it.
- How long does the FCS Simple Patch take to cure?
- Approximately 10 minutes in direct sunlight. The cure is UV-activated, so the board needs to be in the sun, not in the shade or indoors.
- When should I use a Simple Patch versus a full professional repair?
- The Simple Patch is best for surface dings, pressure dents, rail chips, and minor cracks where the goal is to quickly restore waterproofing. For deep structural damage, delamination, or fin-box damage, a professional ding repair is the safer choice.
- Where can I buy the FCS Simple Patch Repair Epoxy?
- It is available at Island Water Sports in South Florida and online at Island Water Sports. It is an authentic FCS product.
- Does FCS support any environmental causes?
- Yes. FCS contributes 1% of sales from Simple Patch products to the Gowings Whale Trust, supporting whale and marine wildlife conservation.